Motorola G52J XT2219-1 Firmware Latest (Flash File)

Motorola G52J XT2219-1 Firmware

Download the latest stock ROM flash file for the Motorola G52J XT2219-1, this firmware is helpful if you have bricked, lag, or shuttering performance.

Motorola G52J XT2219-1 Firmware Stock ROM (Flash File) for your Motorola Android Device. This Firmware Need then you have come to the right place. Motorola G52J XT2219-1 Download try to Install this file to solve your all software and virus problems today give you here full free installation guide.

Stock ROM is running your android device operating system a body your device this Firmware If you have any hard brick problem after the flash dead your Motorola G52J it’s a most common problem don’t worry just install the firmware on your device definitely solve your problem, the most device gets hard brick because of the carelessness of some users.

Stock Rom Benefits

if you have any kind of software issue problem on your device that needs flash on a Motorola G52J XT2219-1, Fix Network related issue, fix your Hang On Logo Problem, unroot your device and fix system bug error camera failed, Fix your Unknown Baseband and IMEI Issue, Motorola id on your Device, fix you Automatically install the application on your smartphone problem, solve custom binary blocked by FRP lock, Fix your Frp Or Gmail Lock problem and more.

Motorola G52J XT2219-1 Firmware Download

Motorola G52J XT2219-1 Flash File (Stock ROM) Without Password

Latest Update Firmware For Motorola XT2219-1

Motorola G52J XT2219-1 Latest Stock ROM Flash File Download

File Password:

DownloadMotorola G52J XT2219-1
Download LinkCYPFR_G_RRYBS31.Q3-80-29-3


  • This Stock ROM works only on the Motorola G52J.
  • Make sure to charge your device more than 40%.
  • You need an Flashing Tools RSD Lite Tool/Fastboot Tools.

How to install Stock ROM on Motorola G52J

  • Download and Extract Firmware & RSD Lite tool
  • Install RSD Lite and usb driver on your pc
  • now extracting the Firmware you will see an XML file “XXX” then open the file with notepad. Remove all lines with the word “getvar” there were two lines that have the word “getvar”, then save. (Note: Skip if No getvar)
  • Open RSD Lite, Press the ” Next to the Filename. Find and select the XML file that has been edited in step No.3
  • Reboot phone to bootloader by pressing volume down & power key
  • Connect Phone to pc by using the good usb cable
  • Click Download/start, wait until done. once done unplug device and switch it ON

Leave a Comment