Itel IT1508 Flash File (Free Care) Stock Firmware

Itel IT1508 Flash File

If you need an Itel IT1508 Flash File then you have come to the right place. This device CPU Spreadtrum and firmware format Pac, you have the latest version SPD flash tool try to Install this file to solve your software problem today give you here All version free firmware and full installation guide.

What is stock ROM

Stock ROM is a runs your android device operating system a body your device this flash file, If you have any hard brick problem after the flash dead your Itel IT1508 device its most common problem don’t worry just install this firmware on your device definitely solve your all problem.

Why Need Firmware

The reasons why your device will flash hang on logo problem hard reset not working, Automatically application error, FRP lock Fix, IMEI null problem, baseband unknown, if you had forgotten password, Auto Apps Run Virus Clean and monkey virus, After the Flash Dead and display problem then you try to install the Itel IT1508 firmware on your android device.

Itel IT1508 Firmware Download

Itel IT1508 Stock ROM Dead [Logo & Frp Fix] Without Password

Care Stock Firmware Flash File Download For Itel IT1508

Itel IT1508 Care tested Stock Firmware Flash File Download Free

File Password: getgsmtips.com

DownloadItel IT1508
Google Drive – MediaFireIT1508-V160-20160602
Google Drive – MediaFireIT1508-C160J-20180404

Requirements

  • This Stock ROM works only with Itel IT1508.
  • Windows xp/7/10 and use the best quality USB Cable.
  • Download Latest SPD USB Drivers
  • Download Latest SPD Flash Tool

How to install Stock ROM on Itel IT1508

  • Download Stock ROM and extract it on your PC.
  • Always recommended your device data first backup on your pc.
  • Install the Latest Version SPD USB Drivers on your PC.
  • Download the SPD Flashing Tool above my post and extract it on your computer.
  • Open SPD ResearchDownload Tool.
  • then Tap on the loaded packet and select your PAC file.
  • After loading .pac complete now Connect your device to your computer.
  • Then click the start button now Wait for the process completed done.

Leave a Comment